PROJ-FILE-FMT=2
PROJ-DRIVER-NAME='Canon Realis SX50 (Rev C).prjdrv'
PROJ-NAME='Canon Realis SX50'
PROJ-DRIVER-REV='Rev C'
IR-TIME-0L=550u
IR-TIME-0H=550u
IR-TIME-1L=1.69m
IR-TIME-1H=550u
PROJ-BAUD-RATE=19200,8,N,2
IRCODE['_REPEAT']=""
IRCODE['_PREFIX']=""
IRCODE['_SUFFIX']=""
IRCODE['^DELAY']="d5m,d5m",REPEATS=1

; No material changes from Rev A, incremented revision for Application Note format update -- BT

; Rev C - Added FOCUS, ZOOM, and menu navigation commands at request of customer. Those
;         commands are only available in the LOCAL command set, meaning each command needs
;         to have the mode embedded at the start of each RS232 string (e.g., REMOTE or LOCAL). 
;         Bob 8Jan2010

DOC-INSTALLATION-NOTE[1]="The Canon Realis SX50 projector will not respond to most of its own controls while it is powered on and under SmartPanel control. The projector will not respond to its settop controls, except POWER OFF. This is due to the projector design. Please read the Application Note for more information, or contact SP Controls Technical Support."


; power
RSCODE['POWER ON']="'REMOTE',13,d500m,'POWER ON',13",REPEATS=1

; Power On sets the projector to REMOTE mode, or else the projector would not respond to RS-232 mode. While in REMOTE mode, the projector will not repsond to its own settop controls, except for POWER OFF. Once the projector is powered off by any means, it will automatically exit REMOTE mode for its normal LOCAL mode. BT

RSCODE['POWER OFF']="'REMOTE',13,d100m,'POWER OFF',13",REPEATS=1
RSCODE['_POWER POLL']="",REPEATS=1

; volume
RSCODE['VOL ABS']="'AVol=',&VASC2,13"


; source 
RSCODE['D-RGB']="'REMOTE',13,d100m,'INPUT=D-RGB',13",REPEATS=1,IS-SELECTION
RSCODE['A-RGB1']="'REMOTE',13,d100m,'INPUT=A-RGB1',13",REPEATS=1,IS-SELECTION
RSCODE['A-RGB2']="'REMOTE',13,d100m,'INPUT=A-RGB2',13",REPEATS=1,IS-SELECTION
RSCODE['COMP VID']="'REMOTE',13,d100m,'INPUT=COMP',13",REPEATS=1,IS-SELECTION
RSCODE['VIDEO']="'REMOTE',13,d100m,'INPUT=VIDEO',13",REPEATS=1,IS-SELECTION
RSCODE['S-VIDEO']="'REMOTE',13,d100m,'INPUT=S-VIDEO',13",REPEATS=1,IS-SELECTION

; hidden functions
RSCODE['AUTO PC']="'REMOTE',13,d100m,'AUTOPC',13",REPEATS=1,IS-HIDDEN
RSCODE['MUTE ON']="'REMOTE',13,d100m,'MUTE=ON',13",REPEATS=1,IS-HIDDEN
RSCODE['MUTE OFF']="'REMOTE',13,d100m,'MUTE=OFF',13",REPEATS=1,IS-HIDDEN
RSCODE['MENU']="'LOCAL',13,d100m,'RC MENU',13",REPEATS=1,IS-HIDDEN
RSCODE['ADJ UP']="'LOCAL',13,d100m,'RC UP',13",REPEATS=1,IS-HIDDEN
RSCODE['ADJ DOWN']="'LOCAL',13,d100m,'RC DOWN',13",REPEATS=1,IS-HIDDEN
RSCODE['ADJ LEFT']="'LOCAL',13,d100m,'RC LEFT',13",REPEATS=1,IS-HIDDEN
RSCODE['ADJ RIGHT']="'LOCAL',13,d100m,'RC RIGHT',13",REPEATS=1,IS-HIDDEN
RSCODE['ENTER']="'LOCAL',13,d100m,'RC OK',13",REPEATS=1,IS-HIDDEN
RSCODE['FOCUS']="'LOCAL',13,d100m,'RC FOCUS',13",REPEATS=1,IS-HIDDEN
RSCODE['ZOOM']="'LOCAL',13,d100m,'RC ZOOM',13",REPEATS=1,IS-HIDDEN

BYTES-TO-QUEUE=2
POWER-POLL-INTERVAL=5s
POWER-POLL-TIMEOUT=1s
POWER-POLL-THRESHOLD=3
POWER-POLL-STARTBYTE=1
POWER-POLL-MATCH-ANY=False
POWER-POLL-MATCH-BYTES="'00'"
POWER-POLL-TESTBYTE-MASK=255
POWER-POLL-DURING-WARMUP=False
POWER-POLL-DURING-LOCKOUT=False
POWER-POLL-LOCKOUT=1.5M
PROJ-USES-ABSOLUTE-VOL=True
VOL-MUTE=0
VOL-RANGE=20
VOL-FLOOR=0
IO-DOWNTIME=58m
WARM-UP-DELAY=40s
POWER-ON-DELAY=35s
IO-CANCEL-DOWNTIME-ON-RX=False
USE-MODULATION-WHEN-WIRED=False
INVERT-LINE-WHEN-WIRED=True
CARRIER-PERIOD=25.8u
CARRIER-DUTY-CYCLE=50
PROJ-MISSING-THRESHOLD=5
DEFAULT-CORE-FUNCT[REPEAT]='_REPEAT'
DEFAULT-CORE-FUNCT[PREFIX]='_PREFIX'
DEFAULT-CORE-FUNCT[SUFFIX]='_SUFFIX'
DEFAULT-CORE-FUNCT[POLL]='_POWER POLL'
DEFAULT-CORE-FUNCT[ON]='POWER ON'
DEFAULT-CORE-FUNCT[OFF]='POWER OFF'
DEFAULT-CORE-FUNCT[VUP]='VOL ABS'
DEFAULT-CORE-FUNCT[VDN]='VOL ABS'
DEFAULT-SELECTION[1]='VIDEO'
DEFAULT-SELECTION[2]='S-VIDEO'
DEFAULT-SELECTION[3]='A-RGB1'
DEFAULT-SELECTION[4]='A-RGB2'
DEFAULT-HID-FUNCT[OFF]='MENU'
DEFAULT-HID-FUNCT[VUP]='ADJ UP'
DEFAULT-HID-FUNCT[VDN]='ADJ DOWN'
DEFAULT-HID-FUNCT[1]='AUTO PC'
DEFAULT-HID-FUNCT[2]='ENTER'
DEFAULT-HID-FUNCT[3]='ADJ LEFT'
DEFAULT-HID-FUNCT[4]='ADJ RIGHT'
DEFAULT-LOCKOUT=75s
POWER-SENSE-OPTIONS=None,Sensor
IR-WIRING-OPTIONS=
PASSIVE-MODE=False